Welcome to the brand home textile network´╝ü
Call Us
+86-18801066991
Opening Hours
Mon - Sat 8.00-18.00
Custom Rubber Products Home > Custom Rubber Products
Custom rubber products horizontal filter press diaphragm
  • Custom rubber products horizontal filter press diaphragm
  • Custom rubber products horizontal filter press diaphragm
  • Custom rubber products horizontal filter press diaphragm

Custom rubber products horizontal filter press diaphragm

INQUIRY
Custom Rubber products: The advantages of filter press diaphragm filter plates in practical applications:

(1) in the domestic and industrial wastewater treatment industry
With the continuous increase of domestic and industrial wastewater and the gradual improvement of its processing requirements, filtration equipment manufacturers have also brought new challenges. Since the non-uniform characteristics of the sludge can cause the filter plate chamber to be not fully filled, a large pressure difference may be generated on both sides of the vane plate to cause the plate to break. In contrast, diaphragm plates have few boarding events due to the flexibility of the filtration chamber and the avoidance of high filtration pressures. The key technology at the edge of the diaphragm is that even in the case of some chambers, the filtration is guaranteed to proceed normally and there is very little breakage.
 
(2) In the mineral filtration industry
It is well known that since the cost of heat drying is about ten times that of mechanical dewatering, the full utilization of mechanical dewatering is particularly important. Based on this, the problem of re-drying is successfully solved by applying a high-pressure diaphragm filter plate. This saves investment and increases the processing capacity. Under the condition of reducing operating cost, the filter cake solid content can be accurately adjusted according to requirements.
 
(3) In the industry that needs to wash the filter cake
During the washing process of the filter cake, the filter cake is always under pressure in the filter chamber. After the filter cake shrinks and thins, the diaphragm protrudes outward to fill, so that the filter cake is compacted, so as to avoid filtering during washing. Cracks in the cake. After the end of the washing process, the filter cake is pressed to increase the final solids content of the filter cake. For the box filter press, the solid content can only be increased by blowing air into the filter cake for a long time, which not only shortens the washing time, but also greatly reduces the amount of washing water.
Review